HOT ! Other Products ｜Campagnolo FC9-RE Record 2009/10 Ultra Torque 11 Speed Carbon Chainset

Campagnolo 2009/10 Record Ultra Torque 11 Speed Carbon ChainsetCampagnolo Record 11-speed crankset exploits unidirectional and multidirectional carbon fiber.The use of USB™ (Ultra Smooth) Bearings ensures very low friction and enhanced performance. Anticorrosion treatment for the cups of the Ultra-Torque™ system.Campagnolo has redesigned the tooth profile to optimize 11-speeds. Campagnolo's studies led to the ESP (Enhanced Shifting Performance) ACTUATION SYSTEM™, specially developed to improve shifting time. Thanks to the new gear design, there are now two diametrically opposed sectors specialized for upshifting, and two downshifting sectors, also diametrically opposed.This solution makes instantaneous shifting possible both up and down. The darker colour of the gears is the result of a new anodization system which confers greater resistance to wear and saline corrosion.Full-carbon unidirectional-multidirectional cranksHollow cranks (Ultra-Hollow™ Structure)Light alloy fixing bolts and nutsLight alloy chainrings with ESP Actuation System™ (Enhanced Shifting Performance)Chainrings with hard anodization treatment8 pins on the large chainringUSB™ bearings (Ultra Smooth Bearings)LIGHTNESS, RIGIDITY, SIMPLIFIED ASSEMBLY AND MAINTENANCE:   ULTRA-TORQUE™.THIS IS CAMPAGNOLO'S ANSWER IN THE INTEGRATED CRANKSET SECTOR.AFTER MORE THAN 10 YEARS SINCE ITS INTRODUCTION THE ULTRA-TORQUE™ SYSTEM, IT IS STILL CONSIDERED, THE BEST PERFORMING CRANK-SET SPINDLE IN TERMS OF STIFFNESS, LOW WEIGHT AND EFFICIENCY OF POWER TRANSMISSION.Campagnolo found a way to permanently conjoin the semi-axles of the bottom bracket to the respective crankset arms. This redesign made it possible to considerably reduce the lateral dimensions at the axle level and prevent annoying contact with the ankles when turning the pedals.Assembly is simplistic: one single oversize bolt is enough to integrate the two semi-axles. With regard to torque transmission efficiency, this system is equally as effective as a single piece axle.Furthermore, despite the narrow side profile, we have been able to position the bearings outside the bottom bracket shell, resulting in greater axle rigidity from the increased axle diameter. This breakthrough was obtained by using an ingenious mechanical system derived from many years' motoring experience in the rotation axle and engine shaft coupling sector: the Hirth joint.In short , this is a joint with self-centring and self-aligning frontal teeth located in the middle of the bottom-bracketaxle where the ends of the semi-axles, integrated with the crankset arms, come into contact.Campagnolo codes : FC9-RE093C 170mm 39/53 Carbon FC9-REO92C 170mm 39/52 Carbon FC9-RE293C 172.5mm 39/53 Carbon FC9-RE292C 172.5mm 39/52 Carbon FC9-RE593C 175mm 39/53 Carbon FC9-RE592C 175mm 39/52 Carbon FC9-RE793C 177.5mm 39/53 Carbon FC9-RE893C 180mm 39/53 Carbon FC9-RE040C 170mm 34/50 Carbon FC9-RE240C 172.5mm 34/50 Carbon FC9-RE540C 175mm 34/50 Carbon  
Brand:CampagnoloSKU:FC9-RE093CTags:Components, Cranksets, Cranksets - Road DoubleSize:170mm 39/53 FC9-RE093C, 170mm 39/52 FC9-REO92C, 172.5mm 39/53 FC9-RE293C, 172.5mm 39/52 FC9-RE292C, 175mm 39/53 FC9-RE593C, 177.5mm 39/53 FC9-RE793C, 180mm 39/53 FC9-RE893C, 170mm 34/50 FC9-RE040C, 172.5mm 34/50 FC9-RE240C, 175mm 34/50 FC9-RE540C, 175mm 39/52 FC9-RE592C