HOT ! Ortofon: Replacement Stylus for Concorde Music｜ Other Products

replacement stylus for Ortofon Concorde Music Cartridge

Red = Diamond-tipped Elliptical, Blue = Nude Elliptical Diamond, Bronze = Nude Fine Line Diamond, Black & LVB 250 = Nude Shibata Diamond
all styli mounted on premium Aluminum cantilevers except for the Black LVB 250 which is mounted on the extremely stiff + lightweight Boron cantilever

explore the differences below ⤵️
SPECS ACROSS THE LINE

Output voltage at 1 kHz, 5cm/sec: 6mV

Tracking ability at 315Hz at recommended tracking force: 80 µm

Compliance, dynamic, lateral: 15 µm/mN

Tracking force, recommended: 1.8g

Internal impedance, DC resistance: 1.27 kΩ

Recommended load resistance: 47 kΩ

Internal inductance: 815 mH

Recommended load capacitance: 150-300 pF

RED

Channel balance at 1 kHz: 1.5 dB
Channel separation at 1 kHz: 22 dB
Channel separation at 15 kHz: 15 dB
Frequency response 20 Hz - 20 kHz: +3 / -1 dB
Stylus tip radius: r/R 8/18 µm

BLUE

Channel balance at 1 kHz: 1.5 dB
Channel separation at 1 kHz: 25 dB
Channel separation at 15 kHz: 15 dB
Frequency response 20 Hz - 20 kHz: +2 / -1 dB
Stylus tip radius: r/R 8/18 µm

BRONZE

Channel balance at 1 kHz: 1 dB
Channel separation at 1 kHz: 26 dB
Channel separation at 15 kHz: 17 dB
Frequency response 20 Hz - 20 kHz: +2 / 0 dB
Stylus tip radius: r/R 8/40 µm

⬛ BLACK

Channel balance at 1 kHz: 1 dB
Channel separation at 1 kHz: 26 dB
Channel separation at 15 kHz: 18 dB
Frequency response 20 Hz - 20 kHz: +2 / 0 dB
Stylus tip radius: r/R 6/50 µm

BLACK LVB 250

Channel balance at 1 kHz: 1 dB
Channel separation at 1 kHz: 26 dB
Channel separation at 15 kHz: 20 dB
Frequency response 20 Hz - 20 kHz: +2 / 0 dB
Stylus tip radius: r/R 6/50 µm
Brand:OrtofonCategory:_STEREO-hifistylusSKU:rs-181-redTags:2M Black, accessories, cartridges, Ortofon Hifi, TTL-2Wtype:Red Stylus, Blue Stylus, Bronze Stylus, Black Stylus, Black LVB 250 Stylus