Key Features
Integrated 1260W Power Amplifier
8 Mono Mic/Line Inputs
Four Stereo Inputs
Hi-Z Input on Channel 4
Two Aux Sends with Dedicated Outputs
3-Band EQ on Each Channel
Master EQ for Music Playback or Speech
Integrated Feedback Suppressor
Built-In SPX Multi-Effects
Compatible with 4- / 8-Ohm Speakers
Overview
The Yamaha EMX 5 is a 12-input powered mixer with an integrated 1260W amplifier, eight mic/line inputs, four stereo line inputs, and two Aux sends. The mixer features a Hi-Z guitar input on channel four and each channel offers a 3-band EQ for custom tailoring your sound. Channels 1-4 offer XLR-1/4" combo jacks. Channels 5 through 12 provide mono XLR inputs, with channels 5-8 offering 1/4" inputs and 9-12 offering an additional set of stereo RCA inputs. Channels 11/12 also include an 3.5mm stereo mini-jack for connecting portable music players.
The EMX 5 includes a single-knob compressor on channels 1-4, an integrated feedback suppressor, and a built-in multi-effects processor with SPX series algorithms. Additionally, the mixer offers a Master EQ, which provides a single knob to control the level of low end. At the far left, the speech setting cuts low frequencies, while the middle position is neutral for music playback. The far right setting provides a Bass Boost to enhance music playback. Optional accessories available include a foot switch for effects bypass and a rackmount kit. The EMX 5 ships with a standard IEC power cord.
Key Specs
Analog Input Characteristics
Input Connectors
Channels 1-4: 4x Combo XLR-1/4" / 6.35 mmChannels 5/6: 1x XLR, 2x 1/4" / 6.35 mmChannels 7/8: 1x XLR, 2x 1/4" / 6.35 mmChannels 9/10: 1x XLR, 2x RCAChannels 11/12: 1x XLR, 2x RCA, 1x 1/8" / 3.5 mm stereo mini-jack
Load Impedance
Channels 1-4 (XLR Mic/Line): 3 kOhms actual, 50-600 Ohms nominal with micsChannels 1-4 (1/4" Mic/Line): 8 kOhms, 600 Ohms lineChannel 4 (1/4", Hi-Z Engaged): 1 MOhms actual, 10 kOhms lines nominalChannels 5-12 (XLR): 2 kOhms actual, 50 - 600 Ohms lines nominalChannels 5-12 (1/4", RCA, 1/8"): 10 kOhms actual, 600 Ohms nominal
Input Level
SensitivityChannel 1-4 (XLR, Mic): -60 dBu (0.775 mV)Channel 1-4 (XLR, Line): -30 dBu (24.5 mV)Channel 1-4 (1/4", Mic): -50 dBu (2.45 mV)Channel 1-4 (1/4", Line): -20 dBu (77.5 mV)Channel 4 (Hi-Z Engaged, Mic): -50 dBu (2.45 mV)Channel 4 (Hi-Z Engaged, Line): -20 dBu (77.5 mV)Channels 5-12 (XLR): -60 dBu (0.775 mV)Channels 5-8 (1/4"): -20 dBu (77.5 mV)Channels 9-12 (RCA, 1/8"): -8 dBu (316 mV)
NominalChannel 1-4 (XLR, Mic): -43 dBu (5.48 mV)Channel 1-4 (XLR, Line): -13 dBu (173 mV)Channel 1-4 (1/4", Mic): -33 dBu (17.3 mV)Channel 1-4 (1/4", Line): -3 dBu (548 mV)Channel 4 (Hi-Z Engaged, Mic): -33 dBu (17.3 mV)Channel 4 (Hi-Z Engaged, Line): -3 dBu (548 mV)Channels 5-12 (XLR): -43 dBu (5.48 mV)Channels 5-12 (1/4", RCA, 1/8"): -3 dBu (548 mV)
Maximum Before ClipChannel 1-4 (XLR, Mic): -15 dBu (138 mV)Channel 1-4 (XLR, Line): +15 dBu (4.36 V)Channel 1-4 (1/4", Mic): -5 dBu (436 mV)Channel 1-4 (1/4", Line): +25 dBu (13.8 V)Channel 4 (Hi-Z Engaged, Mic): -5 dBu (436 mV)Channel 4 (Hi-Z Engaged, Line): +20 dBu (7.75 V)Channels 5-12 (XLR): -15 dBu (138 mV)Channels 5-12 (1/4", RCA, 1/8"): +25 dBu (13.8 V)
Analog Output Characteristic
Output Connectors
Stereo Out (L/R): 2x 1/4" / 6.35 mm balancedAux Sends (1/2): 2x 1/4" / 6.35 mm balancedRec Out (L/R): 2x RCA unbalanced
Impedance
Stereo Out (L/R): 600 Ohms actual, 10 kOhms LinesAux Sends (1/2): 600 Ohms actual, 10 kOhms LinesRec Out (L/R): 600 Ohms actual, 10 kOhms Lines
Output Level
Stereo Out (L/R): +4 dBu (1.228 V) nominal, +20 dBu (7.75 V) max before clippingAux Sends (1/2): +4 dBu (1.228 V) nominal, +20 dBu (7.75 V) max before clippingRec Out (L/R): -10 dBV (0.308 V) nominal, +18 dBV (7.75 V) max before clipping
Loudspeaker Outputs
Connectors
Speakers A/B: Neutrik speakON NL4, 1/4" / 6.35 mm phone jack
Impedance
Actual Source Impedance: < 0.1 OhmsFor Use with Nominal: 4 Ohm speakers, 8 Ohm speakers
Output Level
4 Ohm Speakers: 500 W (1 Hz THD+N < 1%), 630 W (1 kHz THD+N < 10% [CEA2006])8 Ohm Speakers: 370 W (1 Hz THD+N < 1%), 460 W (1 kHz THD+N < 10% [CEA2006])
General Specifications
Output Power
1 kHz THD+N < 10% (CEA2006): 630 W + 630 W (4 Ohms), 460 W + 460 W (8 Ohms)1 kHz THD+N < 1%: 500 W + 500 W (4 Ohms), 370 W + 370 W (8 Ohms)
Frequency Response
Frequency Response Refer to the nominal output level @ 1 kHzInput to Speakers: +1/-3 dB (40 Hz to 20 kHz)Input to Stereo Out, Aux 1/2 Send: +0.5/-1.0 dB (20 Hz to 20 kHz)
THD + N
Input to Speakers: 0.1% @ 10 W (40 Hz to 20 kHz), 0.05% @ 50 W (1 kHz)Input to Stereo Out, Aux 1/2 Send: 0.03% @ +14 dBu (20 Hz to 20 kHz), 0.007% @ +20 dBu (1 kHz)
Crosstalk
(1 kHz): -85 dB
Input Channels
Mono (Mic/Line): 8Stereo: (Line): 4Total: 12
Output Channels
Speakers: A/BAux 1 SendAux 2 SendStereo Out: L/RRec Out: L/R
Bus
Stereo: 1Aux: 2 (including FX)
Pad
Channels 1-4: 30 dB
Hi-Z Input
Channel 4: Supported
HPF
High Pass Filter (Channels 1-3): 80 Hz, -12 dB/octave
EQ Section
High: 10 kHz +15/-15 dBMid: 2.5 kHz +15/-15 dBLow: 100 Hz +15/-15 dB
Compressor
Single knob compressor
Audio Level Meter
7 points (-20, -10, -6, 0, +6, +10, Peak)
Built-in Effects
SPX Algorithm: 24 programs
Output Channel Function
Master EQ (Speech to Music)Monitor EQFeedback Suppressor
Phantom Power
+48 V
Footswitch Input
Effect mute on/off
Protection
Load Protection: DC-faultAmplifier Protection: Overheat protection, overcurrent protection, integral power protectionPower Supply Protection: Overheat protection, overcurrent protection
Power
Power Requirements: 100-240 VAC, 50/60 HzPower Consumption: 42 W (Idle) / 210 W (1/8 power)
Operating Temperature
32 to 104°F / 0 to 40°C
Dimensions
18.3 x 12.1 x 12.8" / 464.8 x 307.3 x 325.1 mm
Weight
20.9 lb / 9.5 kg
Packaging Info
Package Weight
25.4 lb
Box Dimensions (LxWxH)
22 x 15 x 14"
What's in the Box:
Yamaha EMX 5 12-Input Powered Mixer
Limited 1-Year Manufacturer Warranty
Brand:YamahaSKU:EMX5Tags:Analog Mixers, emx5, Mixers, Powered Mixers, yamaha, Yamaha EMX 5, Yamaha Mixer